Encapsulated filters

Encapsulated filters are filter housings which do not allow to exchange the filter element. The filter housing is either from transparent polyamide (PA/nylong) or from chemically resistent PVDF. There are hose connectors at both sides of the housing. On demand they can be be provided with inner or outer threads.

Encapsulated disposable filter with the designation “C” at the end are meant for coalescence filtration. These filter remove reliably aerosoles, condensates and oil dust from gas streams. Encapsulated coalescnece filter offer an additional hose connector for draining possible  liquids.

Disposable filters with nylon encapsulation (PA/polyamide)

Einwegfilter Disposable Filter DIS-MN
Einwegfilter Disposable Filter DIF-BN
Einwegfilter Polyamid Disposable Filter DIF-IN
Einwegfilter Gas Disposable Filter DIF-LN
Filter type
DIF-MNxx
DIF-BNxx
DIF-INxx
DIF-INxxC
DIF-LNxx
DIF-LNxxC
Max. operational pressure
8.5 bar
8.5 bar
7 bar
7 bar
7 bar
7 bar
Max. operational temperature
110°C
110°C
110°C
110°C
110°C
110°C
Max. operational pressure (7bar)
50°C
50°C
50°C
50°C
50°C
50°C
Diameter body
25.5 mm
36.5 mm
36.5 mm
36.5 mm
58.0 mm
58.0 mm
Length – total
44.5 mm
82.3 mm
116.5 mm
116.5 mm
138.3 mm
138.3 mm
Connectors o.d.
6.3mm
6.3mm
6.3mm
6.3mm
12.7 mm
12.7 mm
Length filter element
16 mm
32 mm
57 mm
57 mm
64 mm
64 mm
Inner diameter filter element
12 mm
12 mm
12 mm
12 mm
25 mm
25 mm

Disposale filter with PVDF encapsulation

Filter type
DIF-BKxx
DIF-LKxx
DIF-LKxxC
Max. operational pressure
8.5 bar
7 bar
7 bar
Max. operational temperature (0 bar)
110°C
110°C
110°C
Max. operational pressure (7 bar)
50°C
50°C
50°C
Diameter body
25.4 mm
58.0 mm
58.0 mm
Length – total
82.3 mm
138.3 mm
138.3 mm
Connectors o.d.
6.3mm
12.7 mm
12.7 mm
Length filter element
32 mm
64 mm
64 mm
Inner diameter filter element
12 mm
25 mm
25 mm
Einweg Absorber Disposable Adsorber DIA-BK-HO Hopkalit
Einwegfilter PVDF Disposable Filter DIF-LK

Selection of filter element

Please replace the “xx”  in the denomination with relevant code for filter fineness  (for example “50” for 2.5µm). You can take the proper code from this table.

The filter elements are bonded/coated with epoxy. Should you require another coating, pls add to the denomiation a “K” for high chemical resistance or a “S” for permanently high tempertures (silicate coating).

CODE
Retention rate for particle <0.1µm in gases
Particle retention rate in liquids >98% at a minimum particle size of:
30
>99.9997%
0.3µm
40
>99.999%
1.0µm
50
>99.99%
2.5 µm
60
>99.5%
8.0 µm
70
>95%
25 µm
80
>75%
75 µm

Hier geht es zu den gekapselten Einwegabsorbern.