Portable Gas analyser
GasAn-A50
The GasAN-A50 thermal conductivity analyzer (TCD) continuously measures the concentration of gas components in industrial and laboratory application. The thermal conductivity analyzer is installed in a small portable housing with complete evaluation electronics and pump, and depending on configuration as well with rechargeable battery and separate measuring cell.
The principle of measurng thermal conductiity (TCD) is based on the dependence of the termperature of a heated resistance wire on the thermal conductivity of the gas which is flowing around the wire. The thermal conductivity of the sample gas changes with the change in the gas omponents. Depending on the thermal conductivity the gas transports more or less tamperatrue from the heating wire to the temperature measurement.
The GasAn-A50 can be used for measurements in corrosive and non-corrosive gases.
The gas analyzer can reliably measure different gas concentrations in different background gases. In order to precisely analyze gases with a thermal conductivity detector (TCD) the thermal conductivity of the sample gas must differ significantly from that of the background gases. The GasAn-A50 gas analyzer canbe used with the following gas mixtures, among others:
Measuring data:
largest measuring range: 0 … 100 % (depending on application)
lowest measuring range: 0 … 1000 Vol.ppm H2
at suppressed measuring ranges 99 …100%
Sample gas flow: 5 … 100 l/h
max. operation pressure < 15 bar (in a vacuum error correction is required from approx. 15 mBar abs. approx.
max. gas temperature 50°C
pressure drop over the sensor 0,1 mBar (10 mm WS) at 40 l/h
Sample gases: Standard gases, corrosive gases possible (100val % Cl”)
Explosion protection possible on request
General data:
Operation temperature +5 … + 55 °C
Storage temperature: -20 … + 60°C at 0 … 95 % rel. humidity
User Interface Membrane keyboard with 4 soft-key buttons and 2 fixed buttons)
LCD Graphic display
Languages: German, English, French
Elektronical data:
Voltage supply: plug-in power supply 24 V/ DC
Power consumption: < 30 VA
Data output:
Analogue output 0/4 … 20 mA
Limit values: 1 x limit value switch – free parameterizable
Interface: RS 232
Optional inputs: external RS232
external barcode scanner
Others: WLAN optional
Datenblatt: