Analysis filter housing
The analysis filters are made from 1.4571 without any welding seams. These filter housings are equipped with two seals. On the process side there is a pressing seal from PTFE (Teflon), On the surrounding side a form-fitting FKM seal (FPM/Viton) is installed, which can also be replaced by other sealing materials.
STV-12XX Analysis filters
Filter Housing | STV-1217 | STV-1257 | STV-1297 |
|---|---|---|---|
Anschluss Filterkopf NPT-i | 1/8″ | 1/8″ | 1/8″ |
Anschluss Filtertopf NPT-i | 1/8″ | 1/8″ | 1/8″ |
Maximaler Betreibsdruck: * | 150 bar | 150 bar | 150 bar |
Maximale Betriebstemperatur: ** | 200 °C | 200 °C | 200 °C |
Länge | 67 mm | 107 mm | 147 mm |
Durchmesser | 36 mm | 36 mm | 36 mm |
Freiraum unter Filter: | 20 mm (mind.) | 60 mm (mind.) | 100 mm (mind.) |
Filterelement: | 12-17-XX | 12-57-XX | 12-97-XX |
Different sizes and threads are available on request!
*The maximum operation pressure refers to the maximum operation temperature.
**The maximum operation temperature can be increased to 450°C in case suitable sealing rings are used.